Master Pools System

Currently Out of Stock, Check Back Soon.

The Master Pools 5 Port Actuator Valve Complete (14927-0000) now made by Pentair is the complete replacement for the Master Pools Actuator System.

The Master Pools 5 Port Actuator Valve Lid (14927-0026) fits Master Pools In-Floor Actuator System. This clear lid creates the proper water pressure to pass through the Master Pools Actuator system.

Visit Here

The Master Pools V-Band Clamp Assembly (14927-0024) secures the Master Pools Actuator Lid to the Actuator Body, creating a air-tight seal on your system.

Visit Here

The Master Pools Actuator Lid O-Ring (O-242-9) made by Super-Pro fits Master Pools In-Floor Actuator Lid (14927-0026). The lid creates a tight seal for the In-Floor Actuator and allows the proper water flow and pressure in the system. The lid o-ring prevents leakage and allows for no air to enter nor exit.

Visit Here

The Master Pools In-Floor Actuator Impeller (14927-0006) made by Pentair fits the Master Pools In-Floor Actuator. As the water moves through the actuator, the impeller moves the gear plate and distributes to the appropriate cleaning heads.

Visit Here

The Master Pools Flat Washer (38907-0011) fits the Master Pools In-floor Actuator and keeps the factory gears and impeller at the proper height. The flat washer reduces wear and increases the lifespan of your entire actuator system. We recommend you use these on each of the large and medium gears, as well as on the impeller shaft underneath the impeller for proper spacing.

Visit Here

The Master Pools In-Floor Actuator Impeller Shaft (14927-0007A) fits the Master Pools In-Floor Actuator System.  The impeller shaft measures 4 3/4" long and threads into the body of the actuator and the lid.

Visit Here

Master Pools Retainer Ring (33107-0021)

The Master Pools Retainer Ring (33107-0021) secures the medium and large gears (see below) to the Master Pools Gear Plate. These rings allows the gears to spin properly and reduces wear of the the entire in-floor cleaning system.

The Master Pools In-Floor Actuator Gear Plate Assembly (14927-0031) made by Pentair fits Master Pools In-Floor Actuator System. This product includes all the necessary Gears (total of 8), Retainer Rings and Gear Plate.

Visit Here

The Master Pools Small Gear (14927-0004) fits the Master Pools In-Floor Actuator System. The Master Pools system requires four small gears per gear plate assembly but does not include retainer rings or flat washers.

Visit Here

The Master Pools Medium Gear (14927-0005A) fits the Master Pools In-Floor Actuator System. The Master Pools system requires two medium gears per gear plate assembly but does not include retainer rings or flat washers.

Visit Here

The Master Pools Large Gear (14927-0020A) fits the Master Pools In-Floor Actuator System. The Master Pools system requires two large gears per gear plate assembly but does not include retainer rings or flat washers.

Visit Here

The Master Pools Actuator Seat Cluster (14927-0009) fits Master Pools In-Floor Actuator System. This Seat Cluster sits just below the Gear Plate Assembly and is used to control the flow of water from the actuator to the cleaning heads.

Visit Here

Currently Out of Stock, Check Back Soon.

Master Pools In-Floor Actuator Internal Repair Kit (14927-0011A)

The Master Pools In-Floor Actuator Internal Repair Kit (14927-0011A) replaces all the internal parts to the Master Pools TurboClean In-floor system.

Visit Here